Raymarine Ray215e - Manual (Page 46)

3-23 Operation with Minimum Function Handset
PRESS & REL
DSC + D/L PRESS & REL
SCAN
Radio enters DSC mode
ROTATE
CH PRESS & REL
DSC ROTATE
CH
[TX] Flashing
PRESS
DSC
Select working channel
ACK received from specified ship Standby for ACK from specified ship
2 seconds after receiving ACK,
switches to selected channel
PRESS
PTT
Select letter assigned to desired MMSI Returns to last used channel
To store an MMSI number in phonebook:
1. Press and release the DSC/PRI and D/L / I.C. keys simultaneously to
place the unit in DSC mode. “70” appears in the large channel display,
the DSC indicator illuminates, and “in” appears in the small channel
display to designate individual call.
2. Press and release the DSC/PRI key. The DSC indicator appears, “0”
is displayed in the large character display, and “1” is displayed in the
small character display.
3. Rotate the Channel Select (CH) knob until the first digit of your MMSI
number appears in the large character display. (Channel UP/DOWN
keys on the handset are disabled during this process).
4. Press the DSC/PRI key once to accept. The small character display
now shows a “2”, designating the second digit in your MMSI number.
5. Rotate the Channel Select (CH) knob until the second digit of your
MMSI number appears in the large channel display.
6. Press the DSC/PRI key once to accept.