Raymarine Ray215e - Manual (Page 48)

3-25 Operation with Minimum Function Handset
4. Press and hold D/L/I.C. The selected number is deleted from the
phonebook and the radio switches to channel 16.
Receiving an Individual Ship’s Call
When an Individual Ship’s Call is received, the radio automatically enters
DSC mode if you are currently on a selected working channel or private
channel, in the Monitor mode, or in the Scan mode.
When receiving Individual Ship’s Call
1. If your station is targeted for an Individual Ship’s Call, a tone sounds
and the unit automatically switches to DSC mode. TX flashes on the
LCD and one of the following categories of Individual Ship’s Calls
flashes in the small number display:
“Ir” for ROUTINE Individual Ship’s Call
“IS” for SAFETY Individual Ship’s Call
“IU” for URGENCY Individual Ship’s Call
2. To acknowledge the incoming Individual Ship’s Call, press the PTT
key. The acknowledge is transmitted and your RAY215E automatically
selects the working channel specified by the originating ship or station.
3. If you do not wish to acknowledge the call, press the 16 key to exit the
DSC mode.
PRESS & RELEASE
16
PRESS & RELEASE
PTT
Receive Individual Ship's Call:
Routine, Safety, or Urgency
Acknowleging the call
Not acknowleging the call