Raymarine Ray215e - Manual (Page 43)

3-20 Operation with Minimum Function Handset
5. Rotate the Channel Select (CH) knob until the second digit of other
ship’s MMSI number appears in the large channel display.
6. Press the DSC/PRI key once to accept.
7. Enter all 9 digits of the MMSI number in the same way.
8. Once the 9th digit has been entered and accepted, the RAY215E plays
back the 9 digits to verify the entry.
If the number is incorrect, press the DSC/PRI key once and release.
The radio will revert to the beginning of the entry process to start over
again. This step can be repeated as many times as required until the
number is entered correctly.
9. When the MMSI number is verified as correct, press and hold the
DSC/PRI key for 2 seconds to verify.
Note: The operation is cancelled if the 16 key is pressed or if no keys
are pressed for 60 seconds during any part of this process.
PRESS & REL
DSC + D/L PRESS & REL
DSC
ROTATE
CH
PRESS & REL
DSC
PRESS & REL
DSC
PRESS & HOLD
DSC
MMSI digit digit position
Select desired digit Next digit position Select desired digit
Continue thru last digit position
Radio enters DSC mode
Radio replays all digits...
MMSI number accepted
PRESS & RELEASE
DSC
Process starts over
...through the 9th position
ROTATE
CH
Select desired digit
ROTATE
CH PRESS & RELEASE
DSC
Radio replays all digits through the 9th position