RayTek 54301 - Manual (Page 30)

Installation
5.3.3 Thermocouple Output
If you are using a J‐ or K‐ thermocouple you must install a
compensation cable. The cable is available as an accessory
(XXXCI1CB25 for Type J, XXXCI2CB25 for Type K) with a cable
length of 7.5 m (24.6 ft.)
Connect the wires according to the following table:
J-Thermocouple Power Supply
+
white
–
red-white
+
red-yellow
–
yellow
Table 1: Wiring the Thermocouple J Compensation Cable
K-Thermocouple Power Supply
+
yellow
–
red-yellow
+
red-white
–
white
Table 2: Wiring the Thermocouple K Compensation Cable
Power +
red-yellow
Power –
yellow
TC J –
red-white
TC J +
white
Figure 12: Wiring the Thermocouple J Compensation Cable
22 MID