Raritan Computer Home Security System - Manual (Page 115)

Chapter 8: Nodes, Node Groups, and Interfaces
97
2. In the list of nodes, select the nodes you want to synchronize. Use
Ctrl+click to select multiple items.
3. Click Synchronize. If the virtual infrastructure had changed since the
last synchronization, the information in CC-SG updates.
ƒ The Configured in Secure Gateway column shows the number of
virtual machines or hosts that are configured in CC-SG.
ƒ The Last Synchronization Date shows the date and time of the
synchronization.
ƒ The Node Status column shows the status of the virtual node.
Enable or Disable Daily Synchronization of the Virtual Infrastructure
You can configure an automatic synchronization of CC-SG with your
virtual infrastructure. The automatic synchronization occurs daily at the
time you specify.
To enable daily synchronization of the virtual infrastructure:
1. Choose Nodes > Virtualization.
2. Select the Enable Daily Automatic Synchronization checkbox.
3. Enter the time when you want the daily synchronization to occur in
the Start Time field.
4. Click Update.
To disable daily synchronization of the virtual infrastructure:
1. Choose Nodes > Virtualization.
2. Deselect the Enable Daily Automatic Synchronization checkbox.
3. Click Update.
Reboot or Force Reboot a Virtual Host Node
You can reboot or force reboot the virtual host server. A Reboot
operation performs a normal reboot of the virtual host server when it is in
maintenance mode. A Force Reboot operation forces the virtual host
server to reboot, even if the server is not in maintenance mode.
To access these commands, you must have the Node In-Band Access
and Node Power Control privilege. You must also be in a user group that
is assigned a policy to access the node you want to reboot or force
reboot.
To reboot or force reboot a virtual host node:
1. Select the virtual host node you want to reboot or force reboot.
2. Click the Virtual Host Data tab.