Raritan Computer Home Security System - Manual (Page 213)

Chapter 14: System Maintenance
195
b. Type the IP address or hostname of the server in the IP
Address/Hostname field.
c. If you are not using the default port for the selected protocol
(FTP: 21, SFTP: 22), type the communications port used in the
Port Number field.
d. Type a username for the remote server in the Username field.
e. Type a password for the remote server in the Password field.
f. In the Directory (Relative Path) field, specify the location to save
the backup file on the FTP server.
ƒ Leave this field blank to save the backup file to the default
home directory on the FTP server.
ƒ Enter a path relative to the default home directory to save the
backup file in a level below the default home directory on the
FTP server. For example, to save the backup file in a folder
called "Backups" under the default home directory, enter
Backups
in the Directory (Relative Path) field.
g. In the "Filename (leave blank to use the default filename
convention)" field, type a filename for naming the backup on the
remote server, or leave blank to accept the default name. The
default name includes "backup" with a date and time.
h. Click Save As Default if you want to save current remote server
settings as default values. A confirmation message appears.
Click OK. Optional.
6. Click OK.
A message appears when the backup completes. The backup file is
saved in the CC-SG file system, and if specified in the Backup to
Remote Location field, to a remote server as well. This backup can
be restored at a later time. See
Restoring CC-SG (on page 197).
Important: The Neighborhood configuration is included in the CC-
SG backup file so make sure you remember or note down its setting
at the backup time. This is helpful for determining whether the
backup file is appropriate for the CC-SG unit you restore.