Raritan Computer Home Security System - Manual (Page 232)

Chapter 15: Advanced Administration
214
6. Click the Adapter Speed drop-down arrow and select a line speed
from the list. Make sure your selection agrees with your switch's
adapter port setting. If your switch uses 1 Gig line speed, select
Auto.
7. If you selected Auto in the Adapter Speed field, the Adapter Mode
field is disabled, with Full Duplex selected automatically. If you
specified an Adapter Speed other than Auto, click the Adapter Mode
drop-down arrow and select a duplex mode from the list.
8. Click Update Configuration to save your changes. Your changes will
not take effect until CC-SG restarts.
ƒ Click Restart Now if you want to automatically restart CC-SG
now.
ƒ Click Restart Later if you would like to manually restart CC-SG
later. See Restarting CC-SG (on page 200).
ƒ Click Cancel to return to the Network Setup panel without
saving your changes. You must click Update Configuration,
then click Restart Now or Restart Later to save your
changes.
Note: If CC-SG is configured with DHCP, you can access CC-SG via the
hostname after a successful registration with the DNS server.