Raritan Computer Home Security System - Manual (Page 170)

Chapter 10: Policies for Access Control
152
7. Click the Days drop-down arrow, and then select which days of the
week this policy covers: All (everyday), Weekday (Monday through
Friday only) and Weekend (Saturday and Sunday only), or Custom
(select specific days).
8. Select Custom to select your own set of days. The individual day
checkboxes will become enabled.
9. Select the checkbox that corresponds to each day you want this
policy to cover.
10. In the Start Time field, type the time of day this policy goes into
effect. The time must be in 24-Hour format.
11. In the End Time field, type the time of day this policy ends. The time
must be in 24-Hour format.
ƒ In the Device/Node Access Permission field:
ƒ Select Control to define this policy to allow access to the selected
node or device group for the designated times and days.
ƒ Select Deny to define this policy to deny access to the selected
node or device group for the designated times and days.
12. If you selected Control in the Device/Node Access Permission field,
the Virtual Media Permission section will become enabled. In the
Virtual Media Permission field, select an option to allow or deny
access to virtual media available in the selected node or device
groups for the designated times and days:
ƒ Read-Write allows both read and write permission to virtual
media
ƒ Read-only allows only read permission to virtual media
ƒ Deny denies all access to virtual media
13. Click Update to save your changes.
14. Click Yes in the confirmation message that appears.
Deleting a Policy
You can delete a policy that is no longer needed.
To delete a policy:
1. Choose Associations > Policies. The Policy Manager window opens.
2. Click the Policy Name drop-down arrow, and then select the policy
you want to delete.
3. Click Delete.
4. Click Yes in the confirmation message that appears.