Onkyo CDR-205X - Manual (Page 33)

33
Operations
Erasing recordings
(CD-RW discs only)
The data recorded on CD-RW discs can be erased
and the disc can be used again as many times as
desired. The erasing methods are given below.
■ Erasing data on unfinalized CD-RWs
Last track erase: Erases only the last track.
Multi-track erase: Erases all tracks from the
selected track to the final track.
All track erase: Erases all tracks.
■ Erasing data on finalized CD-RWs
All track erase: Erases all tracks.
TOC erase: Returns a finalized disc to the
unfinalized condition.
■ Erasing discs
Erases all data recorded on the CD-RW.
Notes:
• If the power is turned off by mistake during an
erase, then immediately turn the power back on.
The process will be automatically resume.
• If "Disc Error" appears during an erase, the
abort the erase and check the disc for scratches,
dirt, or dust. After removing any dirt or dust that
may exist, resume the erase.
• After performing an erase, always remove the
disc before turning off the power. If the disc is
left inside when the power is turned off, there is
a chance the erase may be left uncompleted.
Erasing from a non-finalized CD-RW
1
Insert the CD-RW to be erased.
AUDIO CD RECORDER
ON / OFF
STANDBY
CDR-205X
CD DUBBING
DISPLAY PUSH TO ENTER ( )
AMCS
REC
FINALIZE
INPUT
EDIT/NO
YES
DUAL OPTICAL INPUT
EDIT/NO
YES
q AMCS w
2
Repeatedly press the EDIT/NO button
until "Erase?" appears.
3
Press the YES button.
The erasing method appears.
EDIT/NO
YES