Onkyo CDR-205X - Manual (Page 41)

41
Other Information
Display messages
Message Explanation Pages
Open Disc tray is opening. 16
Welcome Disc tray is closing. 16
Rec Setup Setting initial settings for recording. Please wait. 22
Disc Reading Recognizing disc. Please wait. 16
TOC Reading Reading the table of contents recorded on the disc. Please wait. 16
Monitor Monitoring the input source selected by the INPUT button. 29
PMA Writing Recording TOC data to the disc PMA (Program Memory Area). 18
Never turn off the power while this message is displayed.
Track= ? Select the track to program with the numeric buttons, AMCS dial, 38
or q and w buttons.
Skip Set? Select the track where the SKIP command is to be placed. 30
To place the SKIP command, press the SKIP ID SET button.
Skip Clear? Select the track where the SKIP command is to removed. 31
To remove the SKIP command, press the SKIP ID CLEAR
button.
Last Track? Erasing the last track. 34
To erase the last track, press the YES button or the AMCS dial.
All Track? Erasing all tracks. 34
To erase all track, press the YES button or the AMCS dial.
TOC Erase? Erasing the TOC from a finalized disc to return it 34
to the unfinalized condition. To erase the TOC, press the YES button
or the AMCS dial.
✳ - ✳? Erasing from track selected to last track. 34
To erase, press the YES button or the AMCS dial.
All
→
Disc
→
Erase ?
→
Erase all data from disc. To erase all data, press the YES button or 35
Ers ? ✳✳:✳✳ the AMCS dial.
If during operation a malfunction occurs or an improper operation is performed, the corresponding message
will appear. For a description of these messages, refer to the explanations on the following pages.
Other Information