Over And Back 180 - Manual (Page 180)

Page 180 Setting Preferences for Your Communicator
To enter a password:
1. Tap the Password field.
2. Enter the password you use to log into your server.
3. Hold Option and press Return to finish.
Note: The Password field updates to display the word “Assigned.”
Selecting a connection
The Connection Preferences settings tell your communicator about the hardware you are using
for remote data connections. Normally you’ll use your communicator’s built-in wireless modem to
establish a data connection, but you can also use the infrared port or connect an external modem
to the USB port. See the section that begins on page 173 for details on how to configure
Connection Preferences.
To select a connection:
1. Tap the Connection pick list.
The list displays the configurations in your Connection Preferences panel.
2. Select the appropriate Connection.
Tip: For wireless data access, select Wireless Modem to Modem as the Connection.
Enter password here
Tap here
Tap to display a list of
connection configurations