Over And Back 180 - Manual (Page 205)

Chapter 8 Page 205
5. Click OK.
6. Connect your communicator to the cable and press the HotSync button.
The HotSync operation records network information about your computer on your communi-
cator. With this information, your communicator can locate your computer when you perform
a HotSync operation over the network.
To prepare your communicator for a dial-in network HotSync operation:
Note: If you are performing a network HotSync operation via a LAN, you do not need to prepare
your communicator and can skip to page 206.
1. Press Option and then press Menu to access the Applications Launcher.
2. Tap the HotSync icon .
3. Press Menu .
4. Under Options, select Modem Sync Prefs (/O).
5. Tap Network.
6. Hold Option and press Return to finish.
Note: See the section that begins on page 178 for information on configuring Network
HotSync preferences.
Performing a dial-in network HotSync operation
You are ready to perform a dial-in network HotSync operation after you prepare your computer
and communicator, and select your Conduit Setup options.