Over And Back 180 - Manual (Page 197)

Chapter 8 Page 197
4. Select Enable infrared communication.
The COM port displayed on this screen is the port associated with your infrared device. It
should be different from the port currently defined for cable synchronization.
5. Write down the port listed as “Providing application support” so you can configure HotSync
Manager for infrared communication.
This port is the simulated port. It is the channel through which the actual infrared communi-
cation takes place between your computer and your communicator.
6. Deselect all other check boxes in the Options tab.
7. Click Apply and then click OK.
To enable infrared communication with Windows 2000:
1. Click the HotSync Manager icon in the Windows system tray (bottom-right corner of the
taskbar).
2. Choose Exit to close HotSync Manager.
3. In the Windows taskbar click Start, choose Settings, and then choose Control Panel.
4. Double-click the Wireless Link icon.
5. Click the Image Transfer tab and deselect the Use Wireless Link to transfer images from a
digital camera to your computer check box.
Infrared
ports