Oki B4545 MFP - Manual (Page 104)

Operation
104
Setting the terminal for document deposits,
you must define the type:
• SIMPLE- it may be polled only once from the memory or feeder
• MULTIPLE- it may be polled as many times as necessary from the memory
Setting the terminal for polled documents,
you must define the poll number, then depending on the type of poll you
may:
• launch an immediate poll
• program a delayed poll with a chosen time
• launch a multi-poll, either immediately or later.
Placing a document in deposit
+
Insert the document to deposit in the feeder.
+
Select 34 OK - FAX / POLLING TX and confirm with OK.
+
Choose the type, according to the table below:
+
Confirm deposit by pressing the OK key.
Polling a deposited document
33 OK - FAX / POLLING RX
+
Enter the number of the party whose document you want to poll or
choose your dialing mode (refer to paragraph Dialing, page -76).
Remark : you can poll several documents using the key.
Menu Procedure
SIMPLE
+
Select FEEDER or MEMORY
+
If necessary, adjust the contrast and confirm with OK
+
Enter the number of pages that you wish to deposit
MULTIPLE
+
If necessary, adjust the contrast and confirm with OK
+
Enter the number of pages that you wish to deposit