Oki B4545 MFP - Manual (Page 61)

Setting your terminal
61
D
EACTIVATING THE
I
NTERNET FUNCTION
If you do not wish to use the Internet functions:
91 OK - INTERNET / SUPPLIER
+
Select NO ACCESS in the ISP list and confirm with OK.
M
ESSAGE SERVICE AND THE
LAN
Your terminal also lets you send and receive documents and E-mails from
subscribers throughout your local area network (LAN).
Before LAN transmission, you must:
• check that all initialisation parameters correspond to those configured in
your LAN,
• perform the proper settings, if needed, for the LAN connection.
I
NITIALIZATION PARAMETERS
You must define or, at least check all parameters needed to identify
yourself with the LAN.
If you do not know these parameters, contact your LAN administrator.
The parameters are divided in 3 categories:
• message service, allows you to define the message service identifier, the
message service password and the E-Mail address,
• servers, allows you to identify the name of the OP address of Internet
SMTP providers (send) and POP3 (MBX reception) and the address of
DNS 1 and DNS 2 servers. The server address is made up of 4 groups of
3 digits maximum, separated by dots.
• SMTP Authentification, used to activate the authentification protocol when
the SMTP server used requests this to end e-mails.
Access to connection and message service parameters
91 OK - INTERNET / SUPPLIER
+
Select LOCAL NETWORK from the list and press OK.
Choosing NO ACCESS disables access to LAN / Internet functions.
92 OK - INTERNET / INIT. ETHERNET
921 OK - INTERNET / INIT. ETHERNET / MESS. SERV
+
Enter Email IDENTIFIER , press OK.
+
Enter Email PASSWORD , press OK.
+
Enter E-MAIL ADR , press OK.