P. 91 – Oki B4545 MFP User Manual
Page 91
91
Operation
+
Set the required coordinates with the numeric keypad or
or
. Confirm your setting by pressing key OK.
845 OK - ADVANCED FCT / COPY / CONTRAST
+
The
CONTRAST
parameter is used to select the photocopy
contrast. Adjust the contrast using keys
and
, then
validate the choice with the OK key.
+
You can also directly adjust the desired contrast using the
key, press this key several times until the required
adjustment is obtained without using
845.
846 OK - ADVANCED FCT / COPY / LUMINOSITY
+
The
LUMINOSITY
parameter is used to make your original
document lighter or darker. Adjust the brightness required
using keys
and
, then validate the choice with the OK key.
847 OK - ADVANCED FCT / COPY / BINDING
+
The
BINDING
parameter is used to choose the long or short
side according to the type of binding of your document. Make
your choice using keys
and
, then validate the choice with
the OK key.
Caution -
All settings made using this menu become default
settings of the terminal.
85 OK - ADVANCED FCT / SCAN. & PRINT
+
Use keys
or
of the browser to scroll the setting described
below that you want to modify.
+
Validate your setting by pressing the OK key.
851 OK - ADVANCED FCT / SCAN. & PRINT / PAPER
+
Select
NORMAL
or
THICK
paper using keys
and
.
+
Validate your setting by pressing the OK key.
Remark
: 1) When THICK paper type is selected, the print speed is slowed down.
2) Use the manual feeder for paper with a weight greater than 24 lb.
(90 g/m
2)
.
852 OK - ADVANCED FCT / SCAN. & PRINT / PAPER
+
Select the paper tray that you want to use;
AUTOMATIC
,
LOWER
or
UPPER
using keys
and
.
+
Validate by pressing the OK key.