Onkyo TX-SR8360 - Manual (Page 28)

28
Connecting the AV Receiver —Continued
Video Connections
You only need to use one of the following connection
methods.
■ Using Composite Video
Use a composite video cable to connect the AV
receiver’s V DVD IN jack to the composite video output
on your DVD player, as shown.
■
Using S-Video
Use an S-Video cable to connect the AV receiver’s
S DVD IN jack to the S-Video output on your DVD
player, as shown.
■
Using Component Video
Use a component video cable to connect the AV
receiver’s COMPONENT VIDEO IN1 jacks to the com-
ponent video output on your DVD player, as shown.
• Your TV must also be connected via component video.
Audio Connections
■
Using Coaxial or Optical Connections
• Use a coaxial digital audio cable to connect one of the
AV receiver’s COAXIAL DIGITAL IN jacks to the
coaxial output on your DVD player, as shown.
OR
• Use an optical digital audio cable to connect one of the
AV receiver’s OPTICAL DIGITAL IN jacks to the
optical output on your DVD player, as shown.
Initially, the COAXIAL IN 1 jack is assigned to the
DVD input source. If you connect your DVD player to a
different digital input, you’ll need to reassign the DVD
input source (see page 43).
■ Using Analog Connections
Even if your DVD player is connected digitally (optical
or coaxial), to use
, or to record audio from your
DVD player, you’ll need to make an analog connection
as well.
Use an analog audio cable to connect the AV receiver’s
DVD IN L/R jacks to the analog audio output on your
DVD player, as shown.
If your DVD player has stereo (L/R) and multichannel
outputs, be sure to use the left and right outputs.
Connecting a DVD Player
VIDEO OUT
IN
DVD
DVD player
S VIDEO OUT
DVD
IN
DVD player
COMPONENT
VIDEO OUT
COMPONENT VIDEO
IN 1
Y
P B
P R
Y P B P R
DVD player
DIGITAL
IN 1
COAXIAL
DIGITAL OUT
OPTICAL
DIGITAL OUT
COAXIAL
OPTI-
CAL
IN
Connect one or the other
DVD player
L R
AUDIO
OUTPUT
L
R
DVD
FRONT
DVD player