Onkyo TX-SR8360 - Manual (Page 84)

84
Controlling Other Components —Continued
To control another component, point the remote control-
ler at it and use the buttons as explained below (you must
select the appropriate remote control mode first).
Controlling a TV
Buttons marked with an asterisk can always be used to
control a TV regardless of the currently selected
remote controller mode.
The following buttons control the AV Receiver.
[VOL]: Adjusts the volume of the AV receiver.
[MUTING]: Mutes the AV Receiver.
Controlling a Cable Receiver
The following buttons control the AV Receiver.
[VOL]: Adjusts the volume of the AV receiver.
[MUTING]: Mutes the AV Receiver.
[ON], [STANDBY] Set the TV to On or Standby
TV [ ] Turn the TV On or Off
Number buttons Enter numbers
[CH +/–] Select channels on the TV
[TV INPUT] Select inputs on the TV
VOL [ ]/[ ] Adjust the TV’s volume
CH
TV INPUT
TV CH +/–
VOL
ON
*
*
*
*
STANDBY
TV VOL
TV
Number
buttons
Press [TV]
first
*
[ON], [STANDBY]
Set the cable receiver to On or
Standby
[CH +/–] Select cable channels
Number buttons Enter numbers
CH
ON
STANDBY
Number
buttons
Press
[CABLE]
first