Onkyo TX-SR8360 - Manual (Page 65)

65
Advanced Operations —Continued
You can adjust the level of individual speakers during
playback. These adjustments are temporary and will be
cancelled when the AV receiver is set to Standby.
Notes:
• You cannot use this function while the AV receiver is
muted.
• Speakers that are set to No or None in the Speaker
Configuration cannot be adjusted.
The DVD analog multichannel input is for connecting
components with a 5.1-channel analog audio output,
such as a DVD player or MPEG decoder.
See “Using a Multichannel Connection” on page 29 for
connection information.
Note:
To use the bass and treble functions with the DVD ana-
log multichannel input, select the Multich listening
mode first.
Adjusting Individual Speaker Levels
1 Press the [RECEIVER] button,
use the [CH SEL] button to select
each speaker, and use the
[LEVEL–] and [LEVEL+] buttons
to adjust the volume.
Speakers are selected in the following
order: Front Left
→
Center
→
Front
Right
→
Surr Right
→
Surr Back
Right
→
Surr Back Left
→
Surr Left
→
Subwoofer.
You can adjust the volume of each
speaker from –12 dB to +12 dB
(–15 dB to +12 dB for the subwoofer).
The name of the currently selected
speaker and its volume appear on the
display, as shown.
RECEIVER
CH SEL
LEVEL – +
MULTI CH
RECEIVER
CH SEL
LEVEL+ LEVEL-
Using the DVD Analog Multichannel
Input
1 Press the [RECEIVER] button fol-
lowed by the [MULTI CH] button
so that the MULTI CH indicator
appears on the display.
RECEIVER