Onkyo TX-SR8360 - Manual (Page 33)

33
Connecting the AV Receiver —Continued
■ Using Analog Connections
If your video source doesn’t have a digital audio output,
or you want to record from it, you’ll need to make the
following analog audio connection.
Use an analog audio cable to connect the AV receiver’s
VIDEO 3 IN L/R jacks to the analog audio output on
your video source, as shown.
Video Connections
You only need to use one of the following connection
methods.
■
Using Composite Video
Use a composite video cable to connect the AV
receiver’s VIDEO 4 INPUT VIDEO jack to the com-
posite video output on your camcorder, game console,
etc., as shown.
■ Using S-Video
Use an S-Video cable to connect the AV receiver’s
VIDEO 4 INPUT S VIDEO jack to the S-Video output
on your camcorder, game console, etc., as shown.
Audio Connections
Use an analog audio cable to connect the AV receiver’s
VIDEO 4 INPUT AUDIO L/R jacks to the analog audio
output on your camcorder, game console, etc., as shown.
If your camcorder, game console, etc., has an optical dig-
ital audio output, use an optical digital audio cable to
connect it to the AV receiver’s VIDEO 4 INPUT DIG-
ITAL jack, as shown.
Connecting a Camcorder, Game
Console, etc.
L R
L
R
AUDIO
OUTPUT
IN
VIDEO 3
Satellite, cable, set-top
box, LD player, etc.
VIDEO OUT VIDEO
Camcorder,
game console, etc.
S VIDEO OUT S VIDEO
Camcorder,
game console, etc.
AUDIO L R
L
R
AUDIO
OUTPUT
Camcorder,
game console, etc.
DIGITAL OUT DIGITAL
Camcorder,
game console, etc.