Oki MC860n MFP - Manual (Page 164)

Troubleshooting > 164
Error
544
545
546
547 Please check %COLOR% Toner
Cartridge: %ERRCODE% Toner cartridge lever has not been
locked.
Lock into place securely.
Error 544: Y
Error 545: M
Error 546: C
Error 547: K
Error
340
341
342
343 Please check %COLOR% Image Drum Image drum not installed correctly.
Fit image drum.
Error 340: Y
Error 341: M
Error 342: C
Error 343: K
Error
320 Please check Fuser Unit Fuser unit is not installed correctly.
Fit fuser unit.
Error
330 Please check Belt Unit Belt unit is not installed correctly.
Fit belt unit.
Error
321 Power Off and Wait for a while Motor driver IC overheat detected.
Error
310
311 Cover Open
Close the flashing cover Close the cover.
Error 310: Top cover
Error 311: Front cover
If the code still appears, contact your
dealer.
Error
316 Cover Open
Close the flashing cover Close the duplex cover.
If the code still appears, contact your
dealer.
Error Cover Open
Close the flashing cover Indicates that the ADF cover is open.
Indicates that the inter-lock cover on
the scanner unit is lifted up.
Note: If the inter-lock cover is lifted up
during scanning from the ADF, a
document jam message will display.
If the code still appears, contact your
dealer.
Error Document jam!
Open & check the
flashing cover Indicates a document jam has occurred
during scanning.
See “Clearing Paper Jams” .
If the code still appears, contact your
dealer.
Error Wait a Moment
Program Data Receiving Your machine's network card firmware
is being reprogrammed.
Error Wait a Moment
Program Data Received OK Your machine's network card firmware
is being reprogrammed.
STATUS /
CODE MESSAGE MEANING / ACTION