Oki MC860n MFP - Manual (Page 53)

Configuring Your Machine > 53
Network
Menu (cont.) Network
Setup
(cont.) Subnet Mask xxx.xxx.xxx.xxx Current assigned subnet mask. To
change, proceed as above.
Display condition: TCP/IP protocol
must be enabled.
Gateway
Address xxx.xxx.xxx.xxx Current assigned gateway
address. To change, proceed as
above.
Display condition: TCP/IP protocol
must be enabled.
Web Disable, Enable Enables or disables web config.
facility.
Display condition: TCP/IP protocol
must be enabled.
Telnet Disable, Enable Enables or disables Telnet config.
facility.
Display condition: TCP/IP protocol
must be enabled.
FTP Disable, Enable Enables or disables communication
via FTP.
Display condition: TCP/IP protocol
must be enabled.
IPSec Disable, Enable Enable via the web page or
Configuration Tool.
SNMP Disable, Enable Enables or disables SNMP of FTP
(TCP/IP or NetWare).
Display condition: TCP/IP protocol
must be enabled.
Network Scale Small, Normal Normal: Can work effectively even
when connected to a HUB that has
a spanning tree feature. However,
printer start up time gets longer
when computers are connected to
two or three small LANs.
Small: Computers can cover from
two or three small LANs to a large
LAN, but it may not work
effectively when it is connected to
a HUB with a spanning tree
feature.
HUB Link
Setting Auto Negotiate,
100BASE-TX FULL,
100BASE-TX HALF,
10BASE-T FULL,
10BASE-T HALF Sets the hub linking method.
Network PS-
Protocol ASCII, RAW Select PostScript data format for
the network port.
Factory Defaults Execute Select Yes to reload the settings
present when the unit was setup
by the manufacturer.
Mail Server
Setup SMTP server Set the host name for the SMTP
server.
SMTP Port 00000 ~ 00025 ~
65535 Set the port number.
FEATURE OPTION DESCRIPTION