Oki MC860n MFP - Manual (Page 79)

Operation > 79
Advanced Operation
Using the options available on the touch screen, you can alter the fax output to suit your
needs:
NO. FEATUR
E OPTION DESCRIPTION
1 Others Duplex Scan OFF, Right&Left,
Top Select the bound originals binding position.
Scan Size Auto, A3, B4, A4,
A4 (LEF), B5
(LEF), A5 (LEF),
Letter, Letter
(LEF), Tabloid,
Legal 14, H.LTR Allows you to select the paper size to match
the document size.
Group Tx 01 - 32 Select the required group dial number. Use
the on-screen arrows to scrolled to the next
page.
Cont. Scan OFF, ON Select ON to continue scanning further
pages. Allows you to construct a single scan
job from multiple individual sheets or
originals. Refer to “Continuous Scan Mode”
on page 109 for details.
TTI OFF, ON Prints TTI information on the header of the
transmitted fax.
TTI Select user defined Select the user defined TTI header.
Note: TTI must be ON.
MCF Report OFF, ON Select ON to print a fax confirmation after
transmission.
Delayed Tx user defined Delayed transmission allows you to fax
documents at a specific date and time.
Up to one hundred transmission times can
be scheduled up to one month in advance.
Polling OFF, ON Polling is a process in which documents are
loaded into a machine, and the machine is
then set to wait for a call from a remote
location before faxing.
This mode will allow you to retrieve
documents from a remote fax machine.
1
2
3
4
5
6