Oki MC860n MFP - Manual (Page 171)

Specifications > 171
Network Specification
Connectivity Ethernet 100Base-TX/10Base-T auto-negotiation
with RJ-45 connector
Network protocol TCP/IP:
Network layer - ARP, IP, ICMP, IPv6
Transport layer - TCP, UDP
Application layer - LPR, FTP, TELNET, HTTP, IPP,
DHCP/BOOTP, SMTP, WINS, SNMPv1/v3
NetBEUI:
SMB, NetBIOS
Netware:
Remote printer mode (max. 8 print servers)
Print server mode (max. 8 file server, 32 queues)
Encrypted password support (in print server mode)
NetWare6J/5J/4.1J (NDS, boundary)
SNMP
ETHERTALK:
ELAP, AARP, DDP, AEP, NBP, ZIP, RTMP, ATP, PAP
IEEE802.1X
IEEE802.1X:
EAP-TLS, PEAP
Supported browsers Microsoft IE 4.1 or higher
Netscape Navigator 4.0 or higher
Configuration
requirement IP address
Subnet mask
Gateway
SMTP server/POP3 server
FTP server
Web server
Fax Specification
Circuits PSTN, PBX line
Compatibility Super G3 and G3
Transmission speed Under 3 sec (Super G3); 6 sec (G3)
Line interface Dual RJ-11C (Line and TEL)
Compression method MH, MR, MMR, JBIG
Memory backup 72 hours (after 48 hours full-charge)
Image data memory 16 Mb (ITU-T; 1024 A4 sheets)
Send capacity Max. Tabloid (A3) width
Max. 35.4 inches (900 mm) length
Resolution:
Standard
Fine
Photo
Extra fine
203 x 98 pi
203 x 196 dpi
203 x 196 dpi
406 x 392 dpi
Speed dials 500
ITEM SPECIFICATION