Oki MC860n MFP User Manual
Page 67
Configuring Your Machine > 67
Connecting to a PBX
Private Branch Exchanges (PBXs) are private telephone systems used to route calls
internally, for example, in a company. When dialling a telephone number, if a prefix
(access) number is required to open an outside line, the line is connected to a PBX. If this
unit is going to be connected to a PBX, please make the following changes to enable it to
recognize the prefix digits in the telephone numbers used to obtain access to the outside
line. After dialling the prefix digits, the unit will wait until the outside line is available
(secondary dial tone detected) before dialling the rest of the number.
1.
Press the Setup button on the control panel.
2.
From the touch screen, press the Admin Setup button.
3.
Using the on-screen keyboard, enter the administrator password and press Enter.
4.
From the touch screen, press the Fax Setup button.
5.
From the touch screen, press the Other Settings button.
6.
From the touch screen, press the Arrow button and navigate to page 2.
7.
From the touch screen, press the PreFix button.
8.
Use the on-screen arrow buttons and keypad to enter the required prefix and press
Enter.
9.
Press Close (on four screens) to store the new setting and exit the menu.