Oki MC860n MFP - Manual (Page 57)

Configuring Your Machine > 57
Management
(cont.) Local
Interface USB Menu USB:
Enable, Disable Enable/disable communication
through the USB interface.
Soft Reset:
Disable, Enable Enable/disable the soft reset
command.
Speed:
480Mbps, 12Mbps Select the interface speed.
USB PS-Protocol:
ASCII, Raw Select data format.
Offline Receive:
Disable, Enable Enable/disable offline receive.
Serial Number:
Disable, Enable Enable/disable Serial Number.
Parallel Menu Parallel:
Disable, Enable Enable/disable communication
through the parallel interface.
Bi-Direction:
Disable, Enable Enable/disable Bi-Direction.
EPC:
Disable, Enable Enable/disable EPC.
ACK Width:
Narrow, Medium,
Wide Specify acknowledgment width.
ACK/BUSY Timing:
ACK In Busy, ACK
While Busy Specify acknowledgment timing.
I-PRIME:
Disable, 3 Micro
Sec, 50 Micro Sec Specify I-PRIME setting.
Parallel PS-Protocol:
ASCII, Raw Select data format.
Offline Receive:
Disable, Enable Enable/disable offline receive.
System
Setup Access Control PIN, User/Password,
Disable Enable access control to restrict
usage to authorized user only.
User Auth.
Method Local, LDAP, Secure
Protocol Condition for display: Access
Control must be set to User/
Password.
Unit of Measure inch, millimeter Select unit of measure.
Date Format mm/dd/yyyy,
dd/mm/yyyy,
yyyy/mm/dd Select desired date format.
Allow all reports
to print Disable, Enable Enable/disable report printing.
Near Life LED Disable, Enable Enable/disable near life LED.
Address info
lock timeout 01~03~10 minutes Enter time-out duration.
FEATURE OPTION DESCRIPTION