Oki MC860n MFP - Manual (Page 50)

Configuring Your Machine > 50
Print Setup
(cont.) PCL Setup
(cont.) A4 Print Width 78 Column, 80
Column Sets the number of columns
subject to Auto LF with A4 paper in
PCL. This is the value when Auto
CR/LF Mode is set to OFF with the
10CPI character.
White Page Skip OFF, ON Selects whether blank pages are
printed or not.
CR Function CR, CR+LF Selects whether a received
carriage return character (0Dh)
also causes a line feed.
LF Function LF, LF+CR Selects whether a received line
feed character (0Ah) also causes a
carriage return.
Print Margin Normal, 1/5 Inch,
1/6 Inch Sets the non-printable page area.
Normal is PCL compatible.
True Black OFF, ON Selects whether black image data
is printed using black toner (True
Black ON) or 100% CMY. (Valid in
PCL emulation mode only.)
Pen Width
Adjust OFF, ON The thinnest line width in PCL, a 1-
dot line, may look broken.
ON: when the thinnest line width
is specified, line width is
emphasized to look wider.
OFF: the line appears as specified.
Tray ID# Tray 2:
01~05~59
Tray 3:
01~20~59
MP Tray:
01~04~59 Sets the number to specify Tray 2,
Tray 3, and MP Tray for the paper
feed destination command in
PCL5e emulation.
IBM PPR
Setup Character Pitch 10 CPI, 12 CPI, 17
CPI, 20 CPI,
PROPORTIONAL Specifies character pitch in IBM
PPR emulation.
Font Condense 12CPI - 20CPI,
12CPI - 12CPI Specifies 12CPI pitch for Condense
Mode.
Character Set SET-1, SET-2 Specifies a character set.
Symbol Set IBM 437 Specifies a symbol set.
Letter 0 Style Disable, Enable Specifies the style that replaces
9BH with letter o and 9DH with a
zero
Zero Character Normal, Slashed Sets the zero to be slashed or
unslashed.
Line Pitch 6 LPI, 8 LPI Specifies the line spacing.
White Page Skip OFF, ON Selects whether blank pages are
printed or not.
FEATURE OPTION DESCRIPTION