Ositech comm Trumpcard Data/Fax Modem - Manual (Page 20)

2 - 4 Trumpcard 14400/28800 Modem
Section Two
Connecting to a Telephone Network
through the Line Interface Module
The Trumpcard Modem may be connected to a variety of telephone
networks using the Line Interface Module, and the appropriate Adapter
Cable. Contact Ositech for the latest list of countries supported.
To connect the Trumpcard Modem to your telephone service using the
Line Interface Module, follow these steps:
• Locate the Line Interface Module that has a PCMCIA Modem
Adapter at one end.
• For a multi-function Trumpcard, the Modem connection is identified
on the back of the PC Card; insert the PCMCIA Modem Adapter
connector into the one marked Modem.
• Connect the Trumpcard Modem to your telephone service
connection via the Line Interface Module, using the interconnecting
cable and adapter approved for use in your country.
Note: The PCMCIA Modem Adapter connector is keyed to go in one way
only. If you feel resistance before the connector is fully inserted,
remove the connector, turn it over, and re-insert it.
Line Interface Module Connection to Telephone Network