Ositech comm Trumpcard Data/Fax Modem - Manual (Page 58)

4 - 26 Trumpcard 14400/28800 Modem
Section Four
STORED PROFILE 1:
B1 E1 L2 M1 N1 V1 W0 X4 Y0 &C0 &D0 &G0 &JO &K3 &Q5 &R0
&S0 &T4 &X0
S00:000 S02:043 S06:002 S07:030 S08:002 S09:006 S10:014
S11:095 S12:050 S18:000 S36:005 S37:000 S40:105 S41:135
S46:138 S95:000
TELEPHONE NUMBERS:
0= 1=
2= 3=
&Wn — Store User Profile
Parameters 0 or 1
Default none
Saves the current configuration into non-volatile memory as one of two
user profiles. These settings are restored to the active configuration upon
receiving an Zn command or at power up (see &Y command). The user
profile saved is denoted by the parameter value. This command will yield
an ERROR message if unable to store the current configuration in non-
volatile memory.
Examples
AT&W0 Save as user profile 0
AT&W1 Save as user profile 1
&Yn — Designate Default User Profile
Parameters 0 or 1
Default 0
Designates which of two user profiles will be loaded into the active
configuration at power up. The user profile is denoted by the parameter
value.
Examples
AT&Y0 Selects user profile 0
AT&Y1 Selects user profile 1