Ositech comm Trumpcard Data/Fax Modem - Manual (Page 77)

User’s Guide and Reference 4 - 45
Modem Command Reference
S95 — Extended Result Codes
The bits in this register can be set to override some of the Wn command
options. A bit set to a 1 in this register will enable the corresponding result
code regardless of the Wn setting.
Bit 0 CONNECT result code indicates DCE speed instead
of DTE speed
Bit 1 Append/ARQ to verbose CONNECT XXXX result
code if protocol is not NONE
Bit 2 Enable CARRIER XXXX result code
Bit 3 Enable PROTOCOL XXXX result code
Bit 4 Reserved
Bit 5 Enable COMPRESSION result code
Bit 6 Reserved
Bit 7 Reserved