Olivetti P26W - Manual (Page 21)

Network Configuration> 21
Printer Trap
Setup…
(continued) Detail… By selecting the
button, the
following dialogue
box is displayed:
In the dialogue box,
the following items
can be configured:
Trap Enable Set sending a Trap
packet, enabled or
disabled, for each
destination.
Printer
Reboot Set sending a Trap
packet, enabled or
disabled, when the
printer is rebooted.
Receive
Illegal Set sending a Trap
packet, enabled or
disabled, when the
printer receives an
illegal Trap packet.
On-line Set sending a Trap,
enabled or disabled,
when the printer
turns to ON-LINE.
Off-line Set sending a Trap,
enabled or disabled,
when the printer
turns to OFF-LINE.
Paper Out Set sending a Trap,
enabled or disabled,
when any of these
conditions occur.
Paper Jam
Cover Open
Printer
Error (any
error)
IPX Set node address and network
address to which a Trap packet will
be sent.
ITEM EXPLANATION