Olivetti P26W - Manual (Page 77)

UNIX> 77
5. If remote spooling is not already enabled on the HP-UX
machine, carry out the following configuration.
(a) Stop the printer spooler.
# /usr/sbin/lpshut
(b) Add the following line to the /etc/inetd.conf file and
register the remote spooler.
printer stream tcp nowait root /usr/sbin/
rlpdameon –I
(c) Restart inetd
# /etc/inetd –c
6. Register the remote printer.
Example: setting up a queue called c7350_lp to print to
host c7350
(a) Register the remote printer.
# /usr/sbin/lpadmin -pc7350_lp -v /dev/null
-mrmodel \-ormc7350 -orplp -ocmrcmodel
-osmrsmodel -ob3
(b) Activate the print queue.
# /usr/sbin/accept c7350_lp
(c) Enable the print queue.
# /bin/enable c7350_lp
(d) Enable the printer spooler.
# /usr/sbin/lpsched
To customise output, for example, to add additional commands
at the start of each print job, you can edit a copy of the /usr/
spool/lp/model/rmodel model file then add it using the lpadmin
command.
Example: for printer c7350_lp, with model file called
c7350_model
# /usr/sbin/lpshut
# /usr/sbin/lpadmin –pc7350_lp –
mc7350_model
# /usr/sbin/lpsched