Olivetti P26W - Manual (Page 72)

UNIX> 72
O
PERATING SYSTEM CONFIGURATION
This section explains how to configure a printer for major UNIX
operating systems.
S
UN
OS 4.
X
.
X
(BSD)
CONFIGURATION
The following explanation uses Sun OS 4.1.3 and a C7300V2
printer as examples. The absolute path of commands and the
configuration method may differ between OS versions, so refer to
the workstation manuals for more information.
If you do not have Superuser rights, the network manager should
conduct the configuration.
1. Login as [root] to the workstation.
2. Register the IP address of the network card and the host
name in the /etc/hosts file.
Example: for IP address 192.168.20.127 and host name
c7350
192.168.20.127 c7350
3. Use the ping command to confirm connection with the
network card.
Example: for host name c7350
# ping c7350
If there is no reply, then there is a problem with the
configuration of the IP address (the IP address has already
been set manually or dynamically) or with the network.
Reset the network interface card settings to their defaults
and then try to set a temporary IP address. If you still have
the problem after resetting the network interface card,
consult the network manager.
CAUTION!
If an incorrect IP Address, Subnet Mask or Gateway is
entered, the network may go down or other damage
may occur. Check the address with the network
manager and confirm that the IP address of the printer
has been set.