Olivetti P26W - Manual (Page 31)

Network Configuration> 31
O
PTION
M
ENU
In the [Option] menu, the following item can be selected:
ITEM EXPLANATION
Use TCP/IP
Protocol If this item is selected, AdminManager uses TCP/IP
protocol to search/configure network interface cards.
Use IPX/SPX
Protocol If this item is selected, AdminManager uses IPX/SPX
protocol to search/configure network interface cards.
Environment
Setup TCP/IP Tab
Set broadcast addresses that are
used to search printers using the
TCP/IP protocol. If [Use TCP/IP
protocol] is unchecked, the
search will not be carried out
using TCP/IP.
NetWare Tab
Set network addresses that are
used to search printers via
NetWare protocol. If there any
many NetWare file servers on
your network, specify the
network address to which the
network card belongs. If [Use
NetWare protocol] is unchecked,
the search will not be carried out
using NetWare, but if [Auto
Search] is selected, AdminManager will search all
networks that AdminManager can detect.
TimeOut Tab
[Search Every]: Set response
waiting time from a network card
in seconds.
[Time Out]: Set time out
between AdminManager and the
network interface card in
seconds.
[Retry]: Set how many times the retry will be carried
out between AdminManager and the network
interface card.