Olivetti P26W User Manual
Page 59
Microsoft Windows> 59
If the above IP address is entered, the Port Name will
default to IP_192.168.1.31.
8.
Select [Next]. [Additional Port Information Required] is
displayed.
9.
Under [Device Type], select [Custom] then [Settings].
10.
Ensure [Protocol] is set to [LPR].
11.
Ensure [Queue Name] is "lp" and [SNMP Status Enabled]
is deselected.
12.
Select [OK].
13.
Follow the instructions on the screen to finish installing
the printer.
Port 9100
1.
Select [Start], [Settings], [Control Panel]. and [Printers
and Other Hardware].
2.
Select [Printers and Faxes].
3.
Click [Add Printer] and then select [Next].
4.
Select [Local printer attached to this computer], clear the
[Automatically detect and install my Plug and Play printer]
check box, and then select [Next].
5.
Select [Create a New Port] and select [Type Standard
TCP/IP Port].
6.
Select [Next].
The [Welcome to the Add Standard TCP/IP Printer Port
Wizard] will appear.
Select [Next] and provide the following information. Enter
[Printer name or IP address], for example: 192.168.1.31. If the
above IP address is entered, the Port Name will default to
IP_192.168.1.31.
7.
Select [Next]. [Additional Port Information Required] is
displayed.
8.
Under [Device Type], select [Custom] then [Settings].
9.
Ensure [Protocol] is set to [Raw].