Olivetti P26W - Manual (Page 92)

Appendix – E-Mail Alert Function> 92
A
PPENDIX
– E-M
AIL
A
LERT
F
UNCTION
The following table explains how to set up the E-Mail Alert
function via Telnet.
7: Setup SMTP
(E-Mail)
1: SMTP
Transmit
Set sending E-Mail
via SMTP, enabled or
disabled.
2: SMTP
Receive
Set receiving E-Mail
via SMTP, enabled or
disabled.
3: SMTP
Server
Name
Set IP address or
host name of SMTP
server.
4: SMTP Port
Number
Set port number of
SMTP.
5: E-mail
Address
Set the E-Mail
address used for
[From] field in the
mail header.
6: Reply-To
Address
Set the E-Mail
address used for
[Reply-To] field in the
mail header.
7: Destination
Address1–
11:Destination
Address 5
1: To Address
1–5
Up to five E-Mail
addresses to which E-
Mail alerts can be
sent.
2: Modify mode Select how to notify
warnings/errors via
E-Mail.When any
specified status
changes, E-Mail is
sent immediately if
“EVENT” is selected,
or periodically if
“PERIOD” is selected.
3: Check time
(hours)
Set duration (1-24
hours) to send E-Mail
when you select
"PERIOD" as Notify
mode.