Oki MC160n - Manual (Page 25)

25 Control Panel and Configuration Menu
ADMIN. MANAGEMENT
Specify machine administrator settings, such as network settings, by selecting
ADMIN. MANAGEMENT in the UTILITY menu.
"
The ADMIN. MANAGEMENT menu is accessible only by the administra-
tor.
To display the settings for this menu, select ADMIN. MANAGEMENT, use
the keypad to type in the 6-digit administrator access code (default:
000000), and then press the Enter key.
ADMINISTRATOR NO. For details on specifying these settings, refer to
the Printer/Copier/Scanner User’s Guide on the
CD.
NETWORK SETTING
E-MAIL SETTING
LDAP SETTING
USB SETTING
COMM.
SETTING TONE/PULSE Settings TONE / PULSE
Select the dialing system. If this parameter is
not correctly set to the type of dialing system
used, faxes cannot be sent and received.
Select the correct setting after checking which
type of dialing system is used by your tele-
phone line.
"
If PTT SETTING in the USER SETTING
menu is set to U.S.A, CANADA or NEW
ZEALAND, the settings cannot be
changed.
LINE
MONITOR Settings OFF / LOW / HIGH
Select the volume of the monitoring sound of
the transmission signal.
"
Even when OFF is selected, the
monitoring sound can be heard when the
O
N HOOK key is pressed.
PSTN/PBX Settings PSTN / PBX
Select whether the connected telephone wiring
is a public switched telephone network (PSTN)
or a private branch exchange (PBX).
For a PBX system, the prefix number (outside
line access number or extension number) can
be specified.