Oki MC160n - Manual (Page 49)

49 Sending Faxes
5
Press the or key to select the desired destination, and then press the
Enter key.
"
If the desired recipient name does not appear in the search results, press
the Back key twice to return to the screen allowing you to enter the text to
be searched for, and then try searching for different text.
6
When EDIT=Select appears, press the Enter key again.
7
Press the or key to select FINISH , and then press the Enter key.
"
To erase the selected destinations, press the Stop/Reset key.
Using the Redial Function
To send a fax to the last number dialed, press the Redial/Pause key to recall the
fax number.
1
Press the Redial/Pause key. Check that the desired fax number appears in
the message window.
Specifying Multiple Recipients
A fax can be sent to multiple recipients in a single transmission. There are two
methods for sending a fax to multiple recipients in a single transmission.
„ Using group dial function
„ Using Broadcast function
Sending a Fax to Multiple Recipients (Broadcast
Transmission)
Directly type in multiple destinations, or select from the favorite list, speed dial
destinations or address book.
"
A maximum of 236 destinations can be specified at one time.
"
With the transmission result report, you can check whether the fax was
sent to all recipients. For details on the transmission result report, refer to
“Checking the Transmission/Reception Result From the Message Win-
dow” and “About the Reports and Lists” on page 84.
1
Position the document to be faxed.
2
If desired, adjust the image quality.
"
The document image quality can be adjusted. For details, refer to “Adjust-
ing the Image Quality” on page 44.