Sending a batch transmission – Oki MC160n User Manual
Page 53
53
Sending Faxes
6
Press the
S
TART
key to begin scanning, and then the machine enters trans-
mission standby mode.
appears in the screen when the machine is in standby mode.
"
If you want to cancel a timer transmission, select
CANCEL RESERV.
.
For details, refer to “Canceling a Queued Transmission” on page 58.
Sending a Batch Transmission
Multiple documents can be scanned and stored in the memory of this machine to
be sent together to a single destination at a specified time.
"
From the UTILITY menu, batch transmission settings (transmission time)
must have been registered with a speed dial number in advance. For
details, refer to “Using the Speed Dial Function” on page 47.
1
Position the document to be faxed.
2
If desired, adjust the image quality.
"
For details, refer to “Adjusting the Image Quality” on page 44.
3
Select destinations for the batch transmission from the favorite list, or specify
their speed dial number.
"
For details on selecting destinations from the favorite list, refer to “Using
the Favorite List” on page 46.
"
For details on specifying destinations by their speed dial number, refer to
“Using the Speed Dial Function” on page 47.
4
Press the
S
TART
key to begin scanning, and then the machine enters trans-
mission standby mode.
appears in the screen when the machine is in standby mode.
"
To cancel a batch transmission, select CANCEL RESERV. For details,
refer to “Canceling a Queued Transmission” on page 58.