O'Neil microFlash Series - Manual (Page 34)

24
•
microFlash Configuration User Manual and Technical Guide The O'Neil microFlash Series of Printers
Windows 95 Installation
Insert the microFlash configuration software in a floppy drive. Next,
click on the
Start button, point to Settings , and click Control Panel .
Double-click on Add/Remove Programs . Follow the instructions on
the screen.
Flash Configuration
For both Windows 3.1 and Windows 95 users, the microFlash
configuration icon, titled Flash Configuration will appear on the screen.
Click on the Flash Configuration icon. You will be prompted to choose a
printer.
Highlight the printer type to display both choices. Once you have made
your selection, click on OK. You can return to this menu at a later date
when sending a new configuration to a different printer. Just click on the
Flash Configuration icon when you’re ready to send a new configuration,
and the O’Neil Configuration menu will again ask you to select a printer
type. Click on OK when you’ve made your selection.
The following screen will now appear: