O'Neil microFlash Series - Manual (Page 40)

30
•
microFlash Configuration User Manual and Technical Guide The O'Neil microFlash Series of Printers
Paper Options
Paper Options allows you to set the printer to match the type of paper
you are using.
Click on the Paper Roll button, or from the Configure menu, choose
Paper Options. The following dialog will appear:
Darkness
The Darkness function sets the heat sensitivity for the type of paper you
are using, and for high and low ambient temperatures (which may affect
the temperature of the print mechanism in the microFlash, causing the
print quality to change. )
-15% (lighter) 0% (medium) +35% (darker)
If the print appears too faint, adjust the sensitivity towards the darker end
of the scale until the print is dark and crisp. It is best to avoid setting the
heat sensitivity higher than what is required by the paper.
Choose the heat sensitivity rating by pressing the down arrow and
clicking on the setting you want.
Linerless Labels
You may need a darker setting if using linerless labels. See Darkness
section above.
Ply
Choose the one-or-two-ply setting that matches your paper by clicking on
the arrow to the right of the field to display your choices, and clicking on
your choice.
Click on the OK button to save your paper specifications. They will
appear in the Paper Options box.