Opticon LH2 - Manual (Page 51)

Symbology Options
50 51
Symbology Options
Command Name: Codablock F Symbology
Usage: Sets the Codablock F bar code symbology options.
Description: This command allows you to turn ON or OFF the Codablock F bar
code symbology.
Default: Codablock F is OFF
Programming Code: Serial Command:
Codablock ON P%6d0<┘
P%ce1<┘
Options:
Programming Code:
Serial Command:
Codablock OFF (Default) P%6d1<┘
P%ce0<┘
Note: When Codablock F and Code 128 decoding are enabled, there is some
danger of mistakenly decoding a damaged Codablock F symbol as a Code
128 symbol. Therefore, whenever possible, Code 128 decoding should be
disabled when Codablock F decoding is enabled.