Opticon LH2 - Manual (Page 95)

94
Prefix / Suffix
Prefix \ Suffix
95
Command Name: Suffix Settings
Usage: Sets the suffix for a bar code.
Description: Scan the following barcodes to set appropriate suffix. Make sure to
save settings on your reader before scanning the suffix barcodes. If
you scan more than one suffix you will receive each scanned suffix
in your scanned data (i.e. If you scan comma suffix twice, you will
get two comma suffixes).
Default: There is no suffixe by default.
Programming Code: Serial Command:
Erase Suffix (No Suffix) ---
Options:
Programming Code:
Serial Command:
Suffix - Comma ---
Suffix - Space ---