Opticon LH2 - Manual (Page 90)

Advance Settings
90
Advance Settings
91
Command Name: Windowing
Usage: Sets the imaging window size.
Description: You may optimize the LH2 decode zone if the application only
requires one barcode format. If the size and density of the barcodes
to be scanned are consistent, please select the setting below that
best describes your environment.
Default: The window size is set to 640 x 1024 pixels
Programming Code: Serial Command:
1D & 2D Bar Codes P%53#640<┘
640 X 1024 Pixels (Default) P%54#1024<┘
P%C7#640<┘
P%C8#1024<┘
Options:
Programming Code:
Serial Command:
1D Bar Codes Only P%53#200<┘
200 x 1024 Pixels P%c7#200<┘
Small 2D Bar Codes P%53#480<┘
480 x 480 Pixels P%54#480<┘
P%C7#480<┘
P%C8#480<┘