Opticon LH2 - Manual (Page 8)

Chapter
9
Organization of this Manual
This manual provides the necessary instructions for installing and using an Opticon LH2 Fixed Position
Imager. The manual is organized as follows:
Chapter 1 Introduction and Getting Started
Describes the general operation of a LH2 Fixed Position Imager. Also provides a Quick
Start-Up Procedure that allows you to begin using the imager immediately.
Chapter 2 Technical Specifications
Provides complete specifications, including mechanical details, optical performance,
RS232 communications and other technical data.
Chapter 3 Positioning the Imager for Optimal Performance
Provides detailed instructions and tips for mounting and positioning the imager to
obtain the best scanning performance. Application Notes describe guidelines for
maximizing specific characteristics.
Chapter 4 Configuring the Imager
Describes how various parameters can be programmed to customize the imager for
your specific application.
Chapter 5 Application Engineering Support
Discusses the most common questions and concerns when adapting a LH2 Fixed
Position Imager in your application.
Chapter 6 Imager Servicing and Maintenance
Discusses the LH2 Fixed Position Imager warranty, maintenance and cleaning
procedures.
Appendices Detailed Supporting Information
Provides detailed information in specific areas such as the programming commands for
configuring various parameters of the LH2 Fixed Position Imager.