Opticon LH2 - Manual (Page 60)

Symbology Options
60 61
Symbology Options
Command Name: Maxicode Symbology
Usage: Sets the Maxicode 2D bar code symbology options.
Description: This command allows you to turn ON or OFF the Maxicode 2D bar
code symbology.
Default: Maxicode is OFF
Programming Code: Serial Command:
Maxicode ON ---
Options:
Programming Code:
Serial Command:
Maxicode OFF (Default) P%470<┘
Note: For certain Maxicode (commonly used by UPS™) barcodes printed
on thermal labels may require to manipulate the LED’s on the LH2.
For more information on different settings, please refer to section
“Advanced Settings” on Page 86.