Onkyo AV RECEIVER TX-NR5009 - Manual (Page 53)

53
En
■
Subwoofer Phase
`
0º
`
180º:
Moves the subwoofer phase.
Note
• If the “Subwoofer” setting is set to “No”, this setting cannot be
selected.
■
Wireless Subwoofer
` Yes:
The audio is output from the speakers connected to
the wireless unit.
`
No:
The audio is not output from the speakers connected
to the wireless unit.
When the wireless unit is connected to the UNIVERSAL
PORT jack on the AV receiver, you can select if you wish
to output the audio from the speakers connected to the
wireless unit.
Note
• If the “Subwoofer” setting is set to “No”, this setting cannot be
selected (
➔ page 52
).
■
Subwoofer, Front, Center, Surround,
Front High, Surround Back
(Setting Speakers A and Speakers B)
`
Not Use:
Select if you don’t want to use each speaker with
Speakers A or Speakers B.
`
Use:
Select if you do want to use each speaker with
Speakers A or Speakers B.
If you’re using Speakers B, you can choose whether or not
to use the subwoofer, center, surround, front high, and sur-
round back speakers with the Speakers A and Speakers B
configurations independently. You cannot choose whether
or not to use the front speakers.
Note
• These settings can only be displayed when the “Speakers
Type(Front B)” setting is set to other than “No” ( ➔ page 51 ).
• You cannot select speakers that you set to “No” or “None”.
• “Front” is fixed to “Use”.
Speaker Distance
Here you can specify the distance from each speaker to the
listening position so that the sound from each speaker
arrives at the listener’s ears as the sound designer
intended.
You can set the distances for front speakers A and front
speakers B independently. The other speakers (i.e.,
subwoofer, center, surround, surround back and front
high) use the same distance settings for Speakers A and
Speakers B.
■
Unit
`
feet:
Distances can be set in feet. Range: 0.2ft to 30.0ft in
0.2 foot steps.
`
meters:
Distances can be set in meters. Range: 0.06m to
9.00m in 0.06 meter steps.
(The default setting varies from country to country.)
■
Left, Front Wide Left, Front High Left, Center,
Front High Right, Front Wide Right, Right,
Surround Right, Surround Back Right,
Surround Back Left, Surround Left,
Subwoofer 1, Subwoofer 2
*1
`
Specify the distance from each speaker to your
listening position.
Note
• Speakers that you set to “No” or “None” in the
“Speaker Configuration” cannot be selected (
➔ page 52
).
• Speakers B cannot be selected if “Speakers Type(Front B)” is
set to “No” (
➔ page 51
).
*1 If the “Subwoofer” setting is set to “1ch”, this setting cannot
be selected (
➔ page 52
).
When an optional unit is connected to the
UNIVERSAL PORT jack on the AV receiver, the
speaker setting menu may appear on screen.
This setting is set automatically by
Audyssey MultEQ
® XT32 Room Correction and
Speaker Setup function (
➔ page 33
). For Speakers B,
you need to change the settings manually.