Onkyo AV RECEIVER TX-NR5009 - Manual (Page 61)

61
En
Picture Adjust
Using Picture Adjust, you can adjust the picture quality
and reduce any noise appearing on the screen.
To view the TV picture while setting, press ENTER. To
return to the previous screen, press RETURN.
■
Wide Mode *1*2
This setting determines the aspect ratio.
`
4:3:
` Full:
`
Zoom:
`
Wide Zoom:
`
Auto:
According to the input signals and monitor output
setting, the AV receiver automatically selects the
“4:3”, “Full”, “Zoom” or “Wide Zoom” mode. See
“Monitor Out” for details on the monitor output
setting (
➔ page 48
).
■ Picture Mode *1
`
Custom:
All settings can be performed manually.
` ISF Day:
Setting when a room is bright.
`
ISF Night:
Setting when a room is dark.
`
Cinema:
Select when the picture source is a movie or alike.
`
Game:
Select when the video source is a game console.
`
Streaming:
Attempts to reduce the mosquito noise and block
artifact effects.
`
Through:
Does not adjust picture quality (changes resolution).
`
Direct:
Does not adjust picture quality (does not change
resolution). The video coming from an analog input
and output by HDMI output(s) is processed in the
same way as “Through”.
With “Picture Mode”, you can change the following
settings to be suitable for the movie or game screen by one
operation: “Game Mode”, “Film Mode”, “Edge
Enhancement”, “Noise Reduction”, “Mosquito NR”,
“Random NR”, “Block NR”, “Resolution”,
“Brightness”, “Contrast”, “Hue”, “Saturation”, “Color
Temperature”, “Gamma”, “Red Brightness”, “Red
Contrast”, “Green Brightness”, “Green Contrast”,
“Blue Brightness”, or “Blue Contrast”.
The receiver has been designed to incorporate setup and
calibration standards established by the Imaging Science
Foundation (ISF). The ISF has developed carefully
crafted, industry-recognized standards for optimal video
performance and has implemented a training program for
technicians and installers to use these standards to obtain
optimal picture quality from the receiver. Accordingly,
Onkyo recommends that setup and calibration be
performed by an ISF Certified installation technician.
■
Game Mode *3*4*5
`
Off
`
On
If video signal delay occurs during playback on a video
component (i.e., game console), select the corresponding
input source and set the “Game Mode” setting to “On”.
The delay will decrease but in return the picture quality
will become poor.
■
Film Mode *3*5*6
`
Video:
“Film Mode” detection is not applied and the input
signal is handled as a video source.
` Auto:
Detects whether the input signal is a video or a
movie. If it is a movie, the appropriate conversion is
applied.
The AV receiver will adjust to the picture source,
automatically converting it to the appropriate progressive
signal and reproducing the natural quality of the original
picture.
■
Edge Enhancement *3*5*6
`
Off
` Low
`
Mid
`
High
With Edge Enhancement, you can make the picture appear
sharper.
■ Noise Reduction *3*5*6
`
Off
`
Low
` Mid
`
High
With this setting, you can reduce noise appearing on the
screen. Select the desired level.