Oki B8300 - Manual (Page 45)

Using the printer with a Macintosh — 44
Installing the display fonts
The display fonts for Macintosh are contained
in the [Font] folder of the CD-ROM. Install the
display fonts as needed.
Copy the required display font files to the
[Fonts] folder in the [System] folder of your
computer.
Should any problem occur due to the
installation of display fonts, delete the fonts
from the system.
Using the PPD Utility
Before using the Auditing Mode or the Job
Retention With Password function from a
Macintosh , you must use the PPD Utility to
register account numbers and passwords.
This utility allows up to 20 account numbers to
be registeed for the computer. When printing in
the
Auditing Mode,or using the Job Retention
With Password function, a password must be
specified when printing.
Also, one of the registered account numbers
must be specified on the screen used for
setting print conditions.
Use the utility to change the registered account
numbers.
1. To start this utility, open the [Oki B8300
Extras] folder on your hard disk, and
double-click the [B8300 Utility] icon.
2. Click the [Select] button and select the
PPD files for your printer.
3. To register an account number for the
computer, click the [Add] button for
[Account Number]. The [Account Number]
screen will appear. Enter a five-digit
account number and click the [OK] button.
To delete a registered security password, select
the password in the box and click the [Delete]
button.
4. To register a security password for the job
retention function, click the [Add] button
for [Confidential Print Password[. The
[Confidential Print Password]screen will
appear. Enter a five-digit number in the
box and click the [OK] button.
5. To delete a registered account number,
select the account number in the box and
click the [Delete] button.
6. To save the registered account numbers
and passwords and to exit the utility, click
the [Save and Quit] button.
7. If the PPD file is changed using this utility,
be sure to select the printer again through
the [Chooser]. Use the procedure
described in [Selecting the Printer].