Oki B8300 - Manual (Page 81)

Saddle stitch finisher — 80
Supplies
B8300-SSF staple cartridges must be used for this finisher.
The cartridge package contains three cartridges containing
approx. 5000 staples each.
Saddle stitch finisher functions
Staple sort mode
Collated sets of prints will be stapled and delivered to the offset tray. When saddle stitching is selected,
the prints will be stapled at the centre and delivered to the saddle stitch tray. The stapling positions,
orientation, paper size for stapling, and stapling capacity are shown below.
● Sort mode
Sorted sets will be delivered.
● Group mode
Groups of prints or copies of the same page
will be delivered.
● Offset mode
Sets will move from side to side so that each set or
group will be offset from the previous set or group for
easy separation.
Stapled sets will not be offset.
Stapling positions Portrait orientation Landscape orientation
Top left corner
of printouts Available paper sizes:
8½"
x 11", A4 and B5
Stapling capacity: Up to
50 sheets for any sizes
Available paper sizes: 11" x 17",
8½" x 14", 8½" x 13", 8½" x 11" R,
A3, B4, A4R, and B5R Stapling
capacity: Up to 50 sheets for
8½"
x 11"R, A4R and B5R, and up to
25 sheets for other sizes
Centre left
two positions
of printouts
Same as above Same as above
Lower left corner
of printouts Same as above Same as above
Saddle stitch on
centrefold line Paper in the portrait
direction cannot be
saddle stitched. Available paper sizes: 11" x 17",
8½" x 11"R, A3, B4, and A4R
Stapling capacity: Up to 10 sheets
for any sizes
Printouts Original Printouts Original
Offset mode Non-offset mode